Spend £60 for FREE Delivery
Low Price Promise
Fully Stocked UK Warehouse
Trusted by the trade
Friendly Knowledgeable Team
No Quibble Returns
CLOSE
HAVE A QUESTION?
CLOSE
SHARE WITH A FRIEND

Enter your name, and your friends name and email address

CLOSE
PERSONALISE YOUR ITEM
CLOSE
BULK ORDER QUOTE
CLOSE
Stock Notification

Cramer Ceramic, Enamel & Acrylic Repair Spray - 50ml

Bermuda Blue 650

Extended 1 Year Warranty

In addition to the manufacturers standard warranty (usually 1 year) we also offer the opportunity for you to extend this warranty by a further 1 year for a one off fee. This can be arranged at the point of purchase or within a limited time afterwards.
An extended warranty is an easy way to protect your purchase, against any manufacturing defects causing breakdown. You will benefit from free repairs for the term of the warranty period & If your equipment can't be repaired then we will replace it free of charge.(A delivery surcharge may apply for non UK mainland addresses)
This warranty and the standard manufacturer’s warranty does not cover general wear and tear, abuse or misuse or incorrect installation.
If you would like any further information on our extended warranty scheme please call our Hydrospares team on 01326 371 488 OR email us at info@hydrospares.co.uk

LID: 1716
cramer
50ml
acid free
easy-to-use
£18.49 Inc VAT
3564
3564
2 In StockSame day dispatch if ordered by 14:00
Fast UK Delivery
Cramer Ceramic, Enamel & Acrylic Repair Spray - 50ml
£18.49

Cramer Ceramic, Enamel & Acrylic Repair Spray - 50ml  Bermuda Blue
For covering repairs & unsightly marks on Acrylic, Enamel, Ceramic, Fibreglass and Resin Stone surfaces.

For professional and cost-saving repairs when ease and perfect results are important.

Each Cramer Repair Spray can be used to cover repairs on:

  • Acrylic (Baths)
  • Enamel (Steel/Cast Baths)
  • Ceramic (Sanitaryware)
  • Fibreglass (Baths)
  • Resin Stone (Shower Trays

If you require a colour not shown have a look at the Cramer Colour Card under downloads to see available colours. Colours can be ordered in on request.

DELIVERY RESTRICTIONS & SURCHARGE
We cannot ship this item to Highlands & Islands or International addresses.
The item contains an Aerosol which is prohibited by Royal Mail, most standard Couriers & Air Mail services.
We can only deliver to UK mainland addresses via specialist carrier, therefore a £3.50 additional delivery surcharge will be applied at checkout.

More Info

Easy to use to cover repairs & unsightly marks.

  • Clean area thoroughly before you start
  • Shake can vigorously for 3 mins
  • Spray a sample area first ( min working temperature 20c /64f )
  • Apply the spray thinly from a distance of 15 - 20 cm

Tip:
Even coverage is easier to achieve if you use a mask cut from paper, just cut to size of area being sprayed. For larger areas mask surrounding area.
Hold the mask about 1 - 2 cm in front of the damaged area and start spraying onto the mask, before directing the spray with light movements over the cut out area.
Wait one minute and apply the next coat. Repeat this process until the damaged area has been completely covered. To remove drips or runs you can use Acetone ( follow manufactures instructions )
The repaired area can be polished with either Email Star or Acryl star polish after four days.

Customer Reviews

Write a review

star
star
star
star
star
Questions & Answers

Submit a question

 
warning
Confirm add to basket
Return to listing
Add to basket
COMPARISON BASKET
COMPARE