10% OFF this Easter Weekend - Use code EGG10 (min spend £50) 

FAST UK DELIVERY
Secure Shopping
Fully Stocked UK Warehouse
Hassle Free Returns
Trusted by The Trade
Friendly Knowledgable Team
20 Years Established
Click & Collect
CLOSE
HAVE A QUESTION?
CLOSE
SHARE WITH A FRIEND

Enter your name, and your friends name and email address

CLOSE
PERSONALISE YOUR ITEM
CLOSE
BULK ORDER QUOTE
CLOSE
Stock Notification

Fi-Clor Spa Pipework Cleaner

1lt

Extended 1 Year Warranty

In addition to the manufacturers standard warranty (usually 1 year) we also offer the opportunity for you to extend this warranty by a further 1 year for a one off fee. This can be arranged at the point of purchase or within a limited time afterwards.
An extended warranty is an easy way to protect your purchase, against any manufacturing defects causing breakdown. You will benefit from free repairs for the term of the warranty period & If your equipment can't be repaired then we will replace it free of charge.(A delivery surcharge may apply for non UK mainland addresses)
This warranty and the standard manufacturer’s warranty does not cover general wear and tear, abuse or misuse or incorrect installation.
If you would like any further information on our extended warranty scheme please call our Hydrospares team on 01326 371 488 OR email us at info@hydrospares.co.uk

LID: 5398
Liquid
Odorless
Easy-to-Use
Last Few Remaining
8962
Fi-Clor Spa Pipework Clea
Last 1 availableDue to be discontinued soon
Fast UK Delivery
Fi-Clor Spa Pipework Cleaner
£24.56
RRP £42.34

Specially formulated to clean out the waste - such as oil deposits and soap - that has accumulated in the internal pipework and equipment of spas and hot tubs, which if not removed can act as a breeding site for bacteria.

Treatment should ideally be carried out at least every 12 weeks prior to drain down as this will assist in the removal of biofilm.

Instructions

  1. Remove the filter cartridge and erosion feeder (if fitted) before adding the Fi-Clor Spa Pipework Cleaner to the spa.
  2. Ensure the water is at the normal operating level (at least 50mm above the jets).
  3. Turn on all pumps and boosters, and add 250ml of Fi-Clor Spa Pipework Cleaner into the main skimmer/filter housing.
  4. Fully open all circulation valves and run pumps for a minimum of 15 minutes. Also run blowers for a short period.
  5. Turn off all pumps and allow water to stand for 15 minutes.
  6. Turn on all pumps and boosters for a further 15 minutes (some foaming may be experienced during this period).
  7. Drain the spa/hot tub. Flush the jets and rinse the shell using a hose pipe. Stubborn deposits may require the use of Fi-Clor Spa Surface Cleaner.
  8. Refill the spa/hot tub and commission in the normal manner.
  9. Refit the filter cartridge after cleaning with Fi-Clor Spa Cartridge Cleaner. Clean and refit the erosion feeder (if fitted).
  10. Sanitise your spa/hot tub to the recommended level with one of the sanitising products from the Fi-Clor Spa range, prior to re-using.

The entire contents of this container may be used to treat a Swim Spa.

Warning: Do not use together with other products. May release dangerous gases (chlorine).

Precautions: Never mix chemicals, except by dosing into the spa separately and at different times. Never add chemicals to the water when bathers are in the spa. Store in a cool, dry, well ventilated, secure place away from oxidising and reducing agents, eg, petrol, oil, solvents and organic materials; ammonia, fertiliser and nitrogen compounds; strong acids and alkalis. Avoid direct contact with pool chemicals. Should there be skin contact with chemicals, wash thoroughly.

This is now discontinued and very limited stock

Announcement
Discontinued item 1
Customer Reviews

Write a review

star
star
star
star
star
Questions & Answers

Submit a question

 
warning
Confirm add to basket
Return to listing
Add to basket
COMPARISON BASKET
COMPARE