This pack contains 6 x 1Litre bottles (works out to be £8.95 per bottle)
Pure-Spa Whirlpool & Spa Bath Cleaner is specially formulated to help remove the build up of grease, body oil deposits, soap scum & general grime & slime from your whirlpool system pipework & pump.

It is essential to regularly clean and sanitise your whirlpool bath in order to minimise the growth of bacteria and to control the build up of bath deposits that can accumulate in the pipework.

• For regular cleaning every 3-4 weeks or as necessary
• For Best results use regularly & in conjunction with Pure-Spa Sanitising Tablets 
• This product can be used at different dilutions depending on the level of cleaning required.
• Some foaming will occur so never leave unattended, always close the air valve/turn to minimum.
• Acid Free, Non Hazardous,
• User friendly, Fully Biodegradable,
• Septic tank friendly,
• Safe to use on Chrome, Brass, Gold Plated.
• Stainless Steel, Ceramics, Tiles, PVC & Plastics

For more info please see Help & Advice centre for articles and FAQs

Pure-Spa Cleaning and Sanitising products for whirlpools & Spa Baths are specially formulated to help keep your whirlpool bath & system clean, fresh and hygienic.
Natural use of a whirlpool or Spa bath will cause the system to become polluted over time, this can be due to the build up of soaps, bath additives, grease & body oils etc that can build up inside the pipework & fittings. Pure-spa 'Whirlpool cleaning fluid' helps to clean the whirlpool system in a hygienic manner, & is specially formulated to help remove the build up of these pollutants from the system. In between cleaning applications the regular use of Pure-Spa 'Sanitising tablets' will help to treat your system effectively to minimise the growth of bacteria, thereby leaving your system fresher & more hygienic after each use.

Used correctly & regularly Pure-Spa products will ensure your whirlpool bath remains cleaner & fresher!

How To Use

• Dilute with water up to 600:1 - as a guide this is approx 250mls of cleaner per ave bath of 150 Litres of water (this is based on the ave volume of a 1700mm x 750mm bath)   
• Increase for larger baths
• For an Intensive/purge clean eg. if your bath has not been cleaned in some time, this product can be used up to max dilution of 80:1. This could mean using half - one full bottle of cleaner per application, the solution may then be left in overnight. (see user instructions on bottle)

There are currently no reviews for this product.

Be the first the write a review.