hands
How to use..

Please find below user guides/ instructions for some of the products on our site.

 

!

Pure-Spa Whirlpool Sanitising Tablets
!
Directions for use (avg size bath)
1. After each use of the bath & before emptying, put 1 tablet into the bath water.
 
2. Switch on the system & let it run for 2-3 minutes
 
3. Switch off the system & drain as normal 
4. Your Whirlpool bath has now been been effectively treated.
Only use in accordance with directions on label.   Content  97.5g e
Note: Avoid prolonged contact  with metals
Harmful if swallowed. Contains  Sodium Dichloroisocyanurate
 
1.7g NaDCC per tablet Irritating to eyes & respiratory system. 
Keep out of reach of children
Keep container dry. 
In case of fire & or explosion do not  breathe fumes. 
Contact with acids liberates toxic gas.
In case of contact with eyes, rinse immediately with plenty of water & seek medical advice.
CAUTION: Solution  may bleach fabrics.
WARNING: Do not use with other products.
May release dangerous gases (chlorine)
Very toxic to aquatic organisms, may cause long term adverse effects to the aquatic environment.

Technical info - Pure-Spa Sanitising Tablets

These small, white tablets are based on dry chlorine donor, sodium dichloroisocyanurate (NaDCC) which is blended with effervescent components before being compressed into tablet form.  The result is a fast-dissolving, highly convenient, safer and more accurate alternative to liquid bleach.

Chlorine is regarded by many, including the Health Service and the Government, as the most effective disinfectant in the fight against disease.  That is why it is recommended by the world’s major authorities for use against HIV (AIDS) and Hepatitis B viruses and why almost all of the world’s piped water supplies are treated with chlorine.

Disinfecting solutions prepared from The Pure-Spa Sanitising Tablets containing NaDCC are fast acting and have a complete spectrum of biocidal activity.  Bacteria, bacterial spores, algae, fungi, protozoa and viruses are all sensitive to their effects.

The problem of corrosion associated with liquid bleach has often resulted in the use of more expensive and less effective alternatives.  It has been demonstrated that chlorine solutions produced using NaDCC tablets are in general significantly less corrosive.

Pure-Spa Whirlpool Cleaning Fluid
!

Directions for use: 

1. Fill the bath with warm water (approx 35oC) making sure the jets are just covered.

2. Add the correct amount of product to the water 


   Dilution with water - use the following as a guide. 
   For  regular cleaning at least every  3 - 4 weeks or more often, depending on usage.
   Dilute with water up to 600:1 approx 1/4 bottle (250mls) per average bath (150 Litres of water)

 

   If the whirlpool hasn't been cleaned in some time the product can be diluted  with up to 80:1 with water. 

   As a guide this is normally between 1/2 a bottle (500mls) and a full bottle (1L) per application

   
3. Close Air control (make sure the whirlpool is on its lowest setting)  & run system for 4 - 5 mins
 
4. Turn off & let stand for approx 2-3 hrs, or overnight if necessary. Run system occasionally to agitate.

5. Drain the bath, refill with cold water to flush through,  run  system for 2 minutes, drain the  bath & wipe  interior surface.

 

IMPORTANT - Whirlpools should  be cleaned & sanitised  regularly to help remove the build up of bath deposits & dirt, & to help minimise the growth of bacteria - even if the system isn't used very often! This product contains both cleaning and sanitising agents but for best results we recommend using  Pure-Spa Sanitising tablets in  between cleaning applications.  

Suitable for use on surfaces including chromium, ceramics, plastics, stainless steel & porcelain

Contains no harsh solvents or alkalis or acids. Has an antimicrobial value of 120 when tested to BS 647.  Fully Biodegradable. Presents no effluent problems. Septic tank friendly


HEALTH & SAFETY Non-hazardous. In the event of eye contact, rinse with plenty of clean water, if irritation persists immediate medical attention should be sought. DO NOT INGEST  DO NOT MIX WITH OTHER CHEMICALS   KEEP OUT OF REACH OF CHILDREN    Volume 1 Litre (1000 mls)  

Contains: Silicates < 2%   Cationic suractants < 2%   Non Ionic Surfactants < 10%   Nitrilotriacetate < 5%

 

Aquafinesse
!
aqua finesse

What is AquaFinesse™?
AquaFinesse™ is a completely different spa maintenance alternative to chlorine or bromine.   We provide clean, clear and odor-free water with only one dose per week!   AquaFinesse™ also softens hot tub water by eliminating calcium and scale build-up from the tub's equipment.   Our product not only makes your life easier, it also extends the lifetime of your hot tub up to three times longer than with the use of traditional sanitizers!
When used in combination with a good working ozone or silver ion system, no additional sanitizers are needed.   However, the National Spa and Pool Institute (NSPI) recommends that hot tub owners maintain a minimum level of 1.5-ppm chlorine in the spa water.   To meet these standards, we strongly suggest using the provided sanitizing tablets as directed in the slow-release dispenser. Soon, your water will be in the best shape of its life--no pH products , clarifiers or additional chemicals needed!

How is AquaFinesse™ supplied?
AquaFinesse™ comes in a convenient carrying case that contains everything you need for up to 6 months of effective spa water treatment! The box contains two bottles of our patented AquaFinesse™ solution, a graduated measuring cup, sanitizing tablets, slow release dispenser and instruction card with Frequently Asked Questions (FAQs).

Can I use AquaFinesse™ in any hot tub - old or new?
AquaFinesse™ works beautifully with all tubs as long as the tub has an effective filtration system, removable/cleanable filters and a means of providing water circulation through the filters for at least 4 hours a day.

Can I use AquaFinesse™ in a spa with water that already has chlorine or bromine in it?
If the spa has just been emptied and refilled with fresh water, you can immediately switch to AquaFinesse™.   For a spa that has been sanitized with chlorine or bromine for more than one week, you must drain 1/3 the spa and refill it with new water before using AquaFinesse™.

How do I use AquaFinesse™?
Take one bottle from the carrying case and consult the label for your recommended weekly dose.   Shake well and use the measuring cup to pour the directed amount of AquaFinesse™ into the spa water. Turn on the jets and leave them running for at least two minutes to fully incorporate the solution .
When used in combination with a good working ozone or silver ion system, no additional sanitizers are needed. However, the National Spa and Pool Institute (NSPI) recommends that hot tub owners maintain a minimum level of 1.5-ppm chlorine in the spa water.   To meet these standards, we strongly suggest using the provided sanitizing tablets as directed in the slow-release dispenser.
To use the sanitizing tablets: place one AquaFinesse™ sanitizing tablet into the dispenser, secure cap and place dispenser on top of the water filter (or in the basket).   Allow the dispenser to fill with water.   Before using your tub, ensure that the dispenser is placed in the filter and working properly.  

Do I need to "shock" the spa water before starting the AquaFinesse™ system?
No, it is not necessary to "shock" your water before starting the AquaFinesse™ system.   However, there are certain situations in which we recommend a chlorine shock.   With brand new tubs, we suggest "shocking" the water after you've filled the spa for the first time.   If you also have concerns about the quality of your water supply, you can "shock" the water before starting with AquaFinesse™.
YOU MUST WAIT 4-6 HOURS AFTER "SHOCKING" BEFORE USING AquaFinesse™.

What do the sanitizing tablets do?
A small chlorine-based tablet is used in conjunction with our slow-release dispenser to kill all the bacteria from your tub after it's captured in the filter. The amount of residual chlorine remaining in your spa water is very minimal. This small dose significantly reduces unpleasant smells, dryness or bleaching effects typically associated with chlorine use.
NOTE: The National Spa and Pool Institute (NSPI) recommends that hot tub owners maintain a minimum level of 1.5-ppm chlorine in the spa water.

I just started with AquaFinesse™ and my water is dirty and cloudy - what am I doing wrong?
Nothing! In fact it's a sign that the AquaFinesse™ is working properly to recondition your spa water and equipment. If your spa is older than six months, a considerable amount of calcium and scale buildup will be released by AquaFinesse™ and flushed into your spa * .
During this reconditioning period, we recommend that you clean your filter(s) twice a week.   This helps to ensure that clean and clear water is flowing through your hot tub. When spa is not in use, ensure that the valves, jets and water features are open and water is allowed to flow through them.   Soon your water will be soft and odor-free without feeling slimy or greasy!

*Do not enter hot tub if you cannot see the bottom of the tub

How often should I clean the filters in my hot tub?
AquaFinesse™ works very closely with your tub's filtration system to ensure total water sanitation.   We recommend cleaning the filters twice a week for the first two weeks.   After this initial conditioning period, you should clean or rotate your filters on a weekly basis. For easier maintenance, we also recommend that you purchase back-up filters and rotate them regularly. 
 
What's the best way to clean the filters?
For weekly maintenance, remove the filters from the tub and rinse them completely using the garden hose.   Once a month, soak the filter(s) in a bucket using a filter cleaner and rinse off filters before re-use.   Always allow the filter(s) to dry completely before reinserting them into the tub. 
 
How often should I use AquaFinesse™ to clean my hot tub water?
Use AquaFinesse™ as directed once a week -- do NOT overdose. Set a specific day for this. The sanitizing tablet should be replaced in its dispenser as soon as it has dissolved (approximately 7 to 10 days).

What happens if I overdose my hot tub with AquaFinesse™?
If an overdose occurs, you must drain 1/3 of your hot tub water, refill with fresh water and make sure you thoroughly clean the filters before re-inserting them.   Always make sure you do not overdose.  

How often should I change the spa water?
We recommend changing your water every three to four months. You can also use our test strips to measure whether or not the water needs refreshing. Another good system is to refresh your water each time you purchase a new box of AquaFinesse™.

 Is it safe to drain the water into my lawn?
Yes, AquaFinesse™ is environmentally friendly so will not damage your garden, grass or household pets.

Can I use aromatherapy products with AquaFinesse™?
Yes, as long as the products you use are crystal or salt based and do ot contain oils or other liquids.

E-Cloth
!

The original E-Cloth System uses no chemicals at all. The cloths are made from millions of tiny, clever fibres which have such a good natural cleaning effect that only water is needed to clean absolutely everywhere. Once used the cloths may be washed time and time again and with correct use will last for years. The cloths may be used on all hard surfaces but are especially effective on glass, chrome and stainless steel

How to use the E-Cloth™ Cleaning System  The E-Cloth™ can be used in a variety of ways to maximise their effectiveness:

1.

Wet: start wet for cleaning e.g. the car or the bath. Finish off damp.

2.

Damp:for all other surfaces - wet the cloth completely, wring out all excess water, fold and wipe all surfaces clean.

3.

Dry: for dusting only - drag the folded cloth across the surface. Dust is magnetised to the cloth.

E-Cloth - Frequently Asked Questions

What is the E-Cloth Cleaning System?
A range of high quality micro fibre cleaning cloths which clean ALL hard surfaces. The cloths neither contain nor use chemicals.

How do E-Cloths work?
The cloths are made from a clever fibre which traps and absorbs minute particles of dust and dirt. When water is introduced to the cloths, they will clean grease from a surface without smearing.

How do I use them?
The general purpose cloth may be used dry for dusting, damp with water for all other cleaning. Use the cloth folded so that as much surface area as possible comes into contact with the surface to be cleaned. The glass cloth - spray water onto the surface and wipe.

Where can I use the E-cloths?
The cloths may be used for all general cleaning on all surfaces. They are exceptionally good on stainless steel, glass, chrome and plastics eg. appliances, car, TV etc.

How long will E-Cloths last?
As long as the maintenance instructions are followed, there is no reason why the products shouldn't last for years, with normal use.

Why do manufacturers recommend their customers to use the E-Cloth to clean their appliances?
The E-Cloth is a high quality, chemical free cleaning product which will clean and maintain all appliance surfaces in an easy and efficient manner.

Can the products be used alongside other chemical products?
If there is a build up of grease or other dirt, it may be necessary to first clean this area with a chemical. It will then be easy to maintain the surface using just E-Cloths and water.

 

The E-Cloth - An Allergy Solution

The E-Cloth™ - The solution for people with allergies, asthma, and multiple chemical sensitivity.

40% of the UK population suffer from an allergy such as asthma and chemical sensitivity. Chemicals in everyday cleaning, cosmetic and household products increase the likelihood of an allergy.

E-Cloths are safe for everyone, especially allergy sufferers. They are neither impregnated nor require chemicals to clean. 

E-Cloths have also been awarded a Consumer Award by Allergy UK, the national charity which raises awareness of allergy sufferers.

E-Cloths are ideal for allergy sufferers as they use just water, enabling allergy sufferers to reduce household chemical usage by up to 80-90%